BABA Compliant Anchor Bolts

Under the all manufacturing processes test, where the bar was melted decides the answer before any domestic fabrication

A project can be built from American steel and still fail a Buy America audit. The steel is usually not the problem. The paperwork is.

Under the Build America, Buy America Act, an iron and steel construction material is domestic only if all manufacturing processes occurred in the United States, from the initial melting of the steel through the final application of any coating. The coating clause is where anchor bolts get caught. A bolt melted, rolled and threaded here but galvanized somewhere else does not satisfy the test, and neither does one boxed with imported nuts. For construction materials the test is yes or no, not a percentage of domestic component cost. The funding agency makes the final classification call on a given project, so confirm it wherever the answer changes the buy.

What a defensible submittal contains.

  • A mill test report that ties the heat to domestic melting, with the grade and the mechanical results.
  • Traceability from that heat number to the bolts in the crate. Without it, you have a certificate for material that may not be the material in front of you.
  • Domestic origin documentation for the nuts and washers in the same package. This is the most common failure point and the easiest to miss.
  • The galvanizer’s location, because coating is a manufacturing process under the rule.
  • A statement of domestic origin for the completed assembly, naming the item, the quantity, the heat numbers and the processes performed in the United States.

This is not the same claim as Made in USA. Domestic marketing claims are held to a different standard, all or virtually all US content. BABA turns on a specific list of manufacturing processes and where each one occurred. A bolt can carry the label and still fall short of the rule. The overlapping regimes are also not interchangeable:

  • BABA, on federally funded infrastructure: all manufacturing processes in the United States, including melt and coating.
  • Buy American Act, on direct federal procurement: domestic content thresholds and component tests, a different test entirely.
  • American Iron and Steel, on EPA clean water and drinking water state revolving fund work: all manufacturing processes for iron and steel products in the United States.

The chain breaks in predictable places: imported bar that is processed domestically, a domestic bolt with imported hardware, two heats bundled together because the diameter matched, coating subcontracted across a border, and a certificate that describes the process without ever stating the location.

So put the requirement in the specification and the purchase order, and ask every supplier four direct questions: where is the steel melted, where are the threads rolled, where is the galvanizing done, and where are the nuts made. A supplier who answers all four without checking has done this before.

Atlanta Rod has manufactured anchor bolts in Lavonia, Georgia since 1981, with 100 percent domestic melt and manufacture, in house dimensional, hardness and tensile testing, Charpy V notch testing when S4 is specified, and a certified material test report and a notarized Certificate of Conformance with every shipment. The F1554 anchor bolt range covers the grades, finishes and hardware that ship inside that chain. Request BABA compliant anchor bolts and the documentation ships with the material rather than after it.

Background on the rule and its waivers is on the Build America Buy America page, and the domestic anchor bolt guide covers grade selection, threading and testing.

Contact us today to get a quote: 800-633-6794 or sales@atlrod.com

Related: F1554 anchor bolts · DOT fastener manufacturing · ASTM F1554 material spec · all material grades

Atlanta Rod and Manufacturing
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.