A callout that reads, 3/4 in. anchor bolts, F1554, galv, will get you a price. It will not get you the right bolt.
Somewhere between that note and the pour, three decisions get handed to the fabricator: how much thread, which nut, and how far the bolt projects. All three are cheaper to specify than to correct. Here is how to specify anchor bolts that arrive right the first time.
Five callouts every line item needs.
- Standard and grade, written out. ASTM F1554 Grade 55, not F1554 on its own. The grade is the entire basis of the mechanical requirements.
- Diameter, overall length and thread length as three separate numbers.
- Projection above finished concrete, checked against the actual stack.
- Thread series. Unified coarse is the default. Say so if you need 8UN, metric, ACME or left hand.
- Finish, and the standard it is applied to. Galvanized on its own is not a specification.
Two more fields belong on the anchor bolt schedule when the project calls for them: any supplementary requirement you are invoking, such as S1 weldability or S4 Charpy testing, and whether the steel has to be a domestic melt under a specific funding rule.
Where the reorders start. Length, thread length and projection are three different numbers, and the gap between them is a grout pad plus a base plate plus a washer plus a nut plus spare threads. A 3/4 in. bolt through a 2 in. grout pad, a 1-1/2 in. base plate, an F436 washer and an A563 heavy hex nut is already carrying about 4-3/8 in. of steel and hardware above the concrete before there is a single spare thread. Specify 3 in. of projection on that detail and the bolt is short before it leaves the plant. An extra inch of thread costs almost nothing.
Grade and hardware, in one line. Grade 36 is the default: low carbon, ductile, weldable as furnished, 36 ksi minimum yield. Grade 55 is the DOT and highway callout at 55 ksi minimum yield, and it carries the S1 weldability supplement where the work will be modified in the field. Grade 105 is quenched and tempered alloy at 105 ksi and is never weldable. Those values are fixed by the standard and do not change from one supplier to the next, so see what we manufacture under F1554 rather than reading them off a supplier page.
F1554 defines the bolt, not the nut. Grades 36 and 55 take an ASTM A563 Grade A heavy hex nut. Grade 105 takes A563 Grade D or DH, with A194 Grade 2H as the common practical substitution. Every grade takes an F436 hardened washer. Put it on the schedule so the whole assembly ships as one package.
Send a drawing and we will quote against it, starting from the full F1554 anchor bolt range. Two of these callouts cause enough trouble to have their own posts: why Grade 55 needs S1 when the bolt will be welded, and why a galvanized nut will not run onto a galvanized bolt without overtapping.
Contact us today to get a quote: 800-633-6794 or sales@atlrod.com
